I WANT TO BUY YOUR CONTROL TECHNIQUES...

MDS MODULAR DRIVE SYSTEM

We Buy! Email your surplus Control Techniques inventory list to AutomationBuyers@aol.com

 

I BUY these Control Techniques servo drives and more....

MD-404 MDS Drive Module, 4A Cont. Output Current, 8A Peak Current, with Backplane and Fuses
MD-407 MDS Drive Module, 7A Cont. Output Current, 14A Peak Current, with Backplane and Fuses
MD-410 MDS Drive Module, 10A Cont. Output Current, 20A Peak Current, with Backplane and Fuses
MD-420 MDS Drive Module, 20A Cont. Output Current, 40A Peak Current, with Backplane and Fuses
MD-434 MDS Drive Module, 34A Cont. Output Current, 68A Peak Current, with Backplane and Fuses
 
MP-1250 MDS Power Module, 12.5 kW @ 480Vac, 6.25 kW @ 240Vac, with Backplane
MP-2500 MDS Power Module, 25 kW @ 480Vac, 12.5 kW @ 240Vac, with Backplane
MP-5000 MDS Power Module, 50 kW @ 480Vac, 25 kW @ 240Vac, with Backplane
 
FM-2 FM2 Indexing Module
FM-3 FM3 Programming Module
FM-3DN FM3DN Programming Module with DeviceNet
FM-3E FM-E Programming Module with Ethernet
FM-3PB FM3PB Programming Module with Profibus
FM-4 FM4 Advanced Programming Module
FM-4DN FM4DN Advanced Programming Module with DeviceNet
FM-4E FM4E Advanced Programming Module with Ethernet
FM-4PB FM4PB Advanced Programming Module with Profibus
 
BRM-1 Brake Relay module, 24V, 1 contact, 6 amp, DIN rail mounting (EN, EP, Epsilon, MDS to CBMS, CBMF, XTBMS, XCMDBS)
ECI-44 External connection interface terminal strip, provisions for DIN rail mounting, CMDX cable is required to connect to the drive (EN, Epsilon, MDS)
DGNE Diagnostic analog output connection cable (EN & MDS to Oscilliscope or Meter)
ES-14-3K External Shunt Resistor, 14 Ohm, 3 kW (MP-5000)
ES-20-1K External Shunt Resistor, 20 Ohm, 1 kW (EN, Epsilon, MP-5000)
ES-20-2K External Shunt Resistor, 20 Ohm, 2 kW (EN, Epsilon, MP-5000)
ES-20-500 External Shunt Resistor, 20 Ohm, 500 Watt (EN, Epsilon, MP-5000)
ES-30-1K External Shunt Resistor, 30 Ohm, 1 kW (EN, Epsilon, MP-1250, MP-2500)
ES-30-2K External Shunt Resisitor, 30 Ohm, 2 kW (EN, Epsilon, MP-1250, MP-2500)
MS-510 External Shunt Resisitor, 10 Ohm, 500 Watt (MP-5000)
MS-530 External Shunt Resisitor, 30 Ohm, 500 Watt (MP-1250, MP-2500)
MF-1250-20 AC Line Filter, 3Ø, 20 amp, 480Vac (MP-1250)
MF-2500-35 AC Line Filter, 3Ø, 35 amp, 480Vac (MP-2500)
MF-5000-65 AC Line Filter, 3Ø, 65 amp, 480Vac (MP-5000)
MLR-2580-00 AC Line Reactor, 3Ø, 80 amp, 25 mH (MP-5000, only required on systems using over 35kW of continuous power)
MPF-002-00 Motor power filter for long lead lengths, Size 2 (CMDS, CMDF, CMMS, CMMF)
MPF-003-00 Motor power filter for long lead lengths, Size 3 (CMLS)
 
SCSLD-4 Synchronization Encoder, 3000 Line (12000 PPR Quadrature), Straight Connector
SCSLD-4R Synchronization Encoder, 3000 Line (12000 PPR Quadrature), Right Angle Connector
Cables:
Part # Description
TIA-05 RS232 Serial Interface Molded Cable, DB9-S on computer end, DB9-P on drive end, 5 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master})
TIA-10 RS232 Serial Interface Molded Cable, DB9-S on computer end, DB9-P on drive end, 10 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master})
TIA-15 RS232 Serial Interface Molded Cable, DB9-S on computer end, DB9-P on drive end, 15 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master})
TIA-25 RS232 Serial Interface Molded Cable, DB9-S on computer end, DB9-P on drive end, 25 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master})
TIA-50 RS232 Serial Interface Molded Cable, DB9-S on computer end, DB9-P on drive end, 50 ft Length (EN, Epsilon, MDS to PC, HMI, PLC {Modbus Master})
DDS-001 Standard Multi-Drop, drive to drive serial interface cable, 1 ft Length (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-005 Standard Multi-Drop, drive to drive serial interface cable, 5 ft Length (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-010 Standard Multi-Drop, drive to drive serial interface cable, 10 ft Length (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-015 Standard Multi-Drop, drive to drive serial interface cable, 15 ft Length (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-020 Standard Multi-Drop, drive to drive serial interface cable, 20 ft Length (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-025 Standard Multi-Drop, drive to drive serial interface cable, 25 ft Length (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-050 Standard Multi-Drop, drive to drive serial interface cable, 50 ft Length (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-A-xxx Standard Multi-Drop, drive to drive serial interface cable, Custom Length in 5 ft increments (EN, Epsilon, MDS to EN, Epsilon, MDS)
DDS-RJ45-005 RJ45 to DB9 RS485 Communications Cable,5ft, Typically used with Epsilon, MDS and E Series Drives
DDS-RJ45-010 RJ45 to DB9 RS485 Communications Cable,10ft, Typically used with Epsilon, MDS and E Series Drives
DDS-RJ45-015 RJ45 to DB9 RS485 Communications Cable,15ft, Typically used with Epsilon, MDS and E Series Drives
CMDX-003 Command Cable, Straight DB44M connectors on both ends, 3 ft Length (En, Epsilon, MDS to ECI-44)
CMDX-005 Command Cable, Straight DB44M connectors on both ends, 5 ft Length (En, Epsilon, MDS to ECI-44)
CMDX-015 Command Cable, Straight DB44M connectors on both ends, 15 ft Length (En, Epsilon, MDS to ECI-44)
CMDX-A-xxx Command Cable, Straight DB44M both ends, Custom Length in 5 ft increments (En, Epsilon, MDS to ECI-44)
CDRO-005 Command Cable to Position Controller, 45° angle DB44M connector at drive, pigtails on controller end, 5 ft Length (EN, Epsilon, MDS to Position Controller, PLC)
CDRO-010 Command Cable to Position Controller, 45° angle DB44M connector at drive, pigtails on controller end, 10 ft Length (EN, Epsilon, MDS to Position Controller, PLC)
CDRO-015 Command Cable to Position Controller, 45° angle DB44M connector at drive, pigtails on controller end, 15 ft Length (EN, Epsilon, MDS to Position Controller, PLC)
CDRO-xxx Command Cable to Position Controller, 45° angle DB44M drive end, pigtails on controller end, Custom Length in 5 ft increments (EN, Epsilon, MDS to Position Controller, PLC)
CMDO-005 Command Cable to Position Controller, Straight DB44M connector at drive, pigtails on controller end, 5 ft Length (EN, Epsilon, MDS to Position Controller, PLC)
CMDO-015 Command Cable to Position Controller, Straight DB44M connector at drive, pigtails on controller end, 15 ft Length (EN, Epsilon, MDS to Position Controller, PLC)
CMDO-A-xxx Command Cable to Position Controller, Straight DB44M drive end, pigtails controller end, Custom Length in 5 ft increments (EN, Epsilon, MDS to Position Controller, PLC)
MC-CEN-002 MC Command and Encoder Feedback Y cable. 44 pin connector on drive end, 9 pin connector and flying lead on MC end. 2 ft Length. (Epsilon, EN, MDS to MC206X or MC224)
MC-CEN-004 MC Command and Encoder Feedback Y cable. 44 pin connector on drive end, 9 pin connector and flying lead on MC end. 4 ft Length. (Epsilon, EN, MDS to MC206X or MC224)
MC-CEN-010 MC Command and Encoder Feedback Y cable. 44 pin connector on drive end, 9 pin connector and flying lead on MC end. 10 ft Length. (Epsilon, EN, MDS to MC206X or MC224)
CFCS-005 Motor Feedback Cable, Connector on both ends, 5 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCS-015 Motor Feedback Cable, Connector on both ends, 15 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCS-025 Motor Feedback Cable, Connector on both ends, 25 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCS-035 Motor Feedback Cable, Connector on both ends, 35 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCS-050 Motor Feedback Cable, Connector on both ends, 50 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCS-075 Motor Feedback Cable, Connector on both ends, 75 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCS-100 Motor Feedback Cable, Connector on both ends, 100 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCS-xxx Motor Feedback Cable, Connector at both ends, Custom Length in 5 ft increments (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCO-005 Motor Feedback Cable, Connector at drive only (use PTO6A-16-23SSR for motor feedback), 5 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCO-015 Motor Feedback Cable, Connector at drive only (use PTO6A-16-23SSR for motor feedback), 15 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCO-025 Motor Feedback Cable, Connector at drive only (use PTO6A-16-23SSR for motor feedback), 25 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCO-035 Motor Feedback Cable, Connector at drive only (use PTO6A-16-23SSR for motor feedback), 35 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCO-050 Motor Feedback Cable, Connector at drive only (use PTO6A-16-23SSR for motor feedback), 50 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCO-075 Motor Feedback Cable, Connector at drive only (use PTO6A-16-23SSR for motor feedback), 75 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
CFCO-100 Motor Feedback Cable, Connector at drive only (use PTO6A-16-23SSR for motor feedback), 100 ft Length (Epsilon, EN, MDS to NT, MG, MH, PTB-16-23)
XCFTS-005 Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , 5 ft Length (Epsilon, EN, MDS to 40-80mm XV )
XCFTS-010 Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , 10 ft Length (Epsilon, EN, MDS to 40-80mm XV )
XCFTS-015 Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , 15 ft Length (Epsilon, EN, MDS to 40-80mm XV )
XCFTS-025 Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , 25 ft Length (Epsilon, EN, MDS to 40-80mm XV )
XCFTS-050 Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , 50 ft Length (Epsilon, EN, MDS to 40-80mm XV )
XCFTS-075 Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , 75 ft Length (Epsilon, EN, MDS to 40-80mm XV )
XCFTS-100 Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , 100 ft Length (Epsilon, EN, MDS to 40-80mm XV )
XCFTS-xxx Motor Feedback Cable, Molded connector on drive end, Amp "Mate-N-Lok" connector on motor end , Custom Length in 5 ft increments (Epsilon, EN, MDS to 40-80mm XV )
SIBAH003 Encoder Feedback cable, 17 pin connector on motor end, 26 pin HD type connector on drive end, 3 meter Length (Unimotor to Epsilon, EN, MDS)
SIBAH005 Encoder feedback cable, 17 pin connector on motor end, 26 pin HD type connector on drive end, 5 meter Length (Unimotor to Epsilon, EN, MDS)
SIBAH010 Encoder feedback cable, 17 pin connector on motor end, 26 pin HD type connector on drive end, 10 meter Length (Unimotor to Epsilon, EN, MDS)
SIBAH015 Encoder feedback cable, 17 pin connector on motor end, 26 pin HD type connector on drive end, 15 meter Length (Unimotor to Epsilon, EN, MDS)
SIBAH020 Encoder feedback cable, 17 pin connector on motor end, 26 pin HD type connector on drive end, 20 meter Length (Unimotor to Epsilon, EN, MDS)
SIBAH025 Encoder feedback cable, 17 pin connector on motor end, 26 pin HD type connector on drive end, 25 meter Length (Unimotor to Epsilon, EN, MDS)
SIBAH030 Encoder feedback cable, 17 pin connector on motor end, 26 pin HD type connector on drive end, 30 meter Length (Unimotor to Epsilon, EN, MDS)
SIBAH-yyy Encoder feedback cable, 17 pin connector motor end, 26 pin HD connector on drive end, Custom Length in 2 meter increments (Unimotor to Epsilon, EN, MDS)


We Buy! Email your surplus Control Techniques inventory list to AutomationBuyers@aol.com

 

 

AutomationBuyers.com

 

 

 

 

 COPYRIGHT © 2001-2017 AUTOMATION BUYERS, LLC